Koch Chemie FW - Fleckenwasser Stain & Wax Remover 1L

Stain, Wax, Tar & Tree Resin Remover

Koch Chemie Fleckenwasser Stain & Wax Remover is an organic solvent mixture designed to remove residues left on a painted surface and doubles up as a great decontamination product too. There are two main uses for this product:

Wax Remover: You can use Koch Chemie Fleckenwasser to remove paraffin waxes, wax residue and strip away paintwork or glass to a clean surface. This is a great step in preparation for applying waxes or sealants after polishing or when you are wanting to do so onto a stripped surface. Fleckenwasser when wiped off thoroughly will not leave residue behind.

Decontamination: You can also use Koch Chemie Fleckenwasser to remove greasy residues left by cosmetics, oils, ink, paint, tar etc. and can act as a stand alone tar remover too.

Contains no halogenated hydrocarbons, safe on all solvent-resistant surfaces.

Areas of Use

Glass, paint, ceramics, metal, solvent-resistant textiles

Directions

• Put a small amount of stain remover on a microfibre cloth
• Work on the stain directly with the microfibre cloth

Choosing the Right Solvent

Stain Removal

For exterior stain removal we recommend the use of Orange Power on plastics & rubber and for more solvent resistant materials we recommend the use of Fleckenwasser or, Eulex which a stronger product but must use with caution as it flashes quickly. For interior use we recommend the use of Orange Power and Tinten- & Kuli Ex. However it’s very important to have a clear understanding of the surfaces being treated and their solvent resistance.

Dewaxer

Fleckenwasser is a strong dewaxing solvent, best used for decontamination to remove all remaining residues of waxes, oils etc before Iron removal. Contains acetone so it’s not recommend to remove fine polishing oils as it can soften the surface, increasing the chances of micro-marring with a microfibre towel. For this purpose we recommend Silicon- & Wachsentferner, diluted.

Adhesive Removal

We recommend Orange Power on sensitive surfaces such as plastics & rubber. Also recommended for adhesive removal over larger surface areas because of its slow vaporising. For use on smaller, more solvent resistant areas we recommend Eulex, a strong adhesive remover with quick flash times.

Tar Remover

For more solvent resistant surfaces we recommend Teerwasche. For more sensitive areas such as plastics & rubber we recommend Orange Power.

Fleckenwasser is a great multi-purpose solvent for removing waxes, oils & tar during the decontamination process but for any remaining, stubborn tar deposits we recommend the follow up use of Teerwasche.

Tree Resin

Fleckenwasser for more solvent resistant surfaces and Orange Power for the more sensitive surfaces.