Your Cart is Empty
Did the job of leveling coating as advertised
Did a good job of removing residual left when coating car
Great product and more than happy with how easy it is to use and the results.
MTM Hose Reel
$279.95$0.00
- 30m capacity
- Painted metal reel
- Brass swivels
- Inlet: 3/8" Male NPT
- Outlet: 3/8" Female NPT
MTM Hose Reel
MTM Hydro's Hose Reels offer a consolidated and organised method for storing your pressure washer hose! Hardware is not included for mounting as this is specific to your setup, however the high grade brass swivel is recognised by many to outperform most other models in the cold water hose reel division.
Simply slide the swivel end of your Kobrajet hose through the opening provided at the side of the reel core and install the 3/8" Male NPT threads into the 3/8" Female NPT threads of the swivel.
Do not make a Quick Coupling joint at the swivel as there is not enough space and the bend in the line is too severe. Be sure to allow a small amount of slack at the swivel joint and use the red hose fastener provided to secure the hose at this joint.
Using a Whip Line connected to your pump, connect to the 3/8" Male NPT hose reel inlet. When planning, add an extra foot to the distance so as not to bend the Whip Line too severely. Lastly, install the handle with the hardware provided.
You may also like
- 30m capacity
- Painted metal reel
- Brass swivels
- Inlet: 3/8" Male NPT
- Outlet: 3/8" Female NPT
MTM Hose Reel
MTM Hydro's Hose Reels offer a consolidated and organised method for storing your pressure washer hose! Hardware is not included for mounting as this is specific to your setup, however the high grade brass swivel is recognised by many to outperform most other models in the cold water hose reel division.
Simply slide the swivel end of your Kobrajet hose through the opening provided at the side of the reel core and install the 3/8" Male NPT threads into the 3/8" Female NPT threads of the swivel.
Do not make a Quick Coupling joint at the swivel as there is not enough space and the bend in the line is too severe. Be sure to allow a small amount of slack at the swivel joint and use the red hose fastener provided to secure the hose at this joint.
Using a Whip Line connected to your pump, connect to the 3/8" Male NPT hose reel inlet. When planning, add an extra foot to the distance so as not to bend the Whip Line too severely. Lastly, install the handle with the hardware provided.