Your Cart is Empty
Bilt Hamber Touch-Less V2 Pre-Wash 5L
$114.90$0.00
LIMITED STOCK ARRIVING WEDNESDAY 30TH OCTOBER
- Eco-friendly pressure-washer, pre-clean, snow foam
- Bio-degradable & sugar-based
- Contains corrosion inhibitors
- Contains no phosphates, solvents, NTA, or caustic soda
- Eases the effort of subsequent bucket washes & helps post-treatments bond too
- pH Value: 12
NON-CONTACT PRE-WASH CLEANER
Bilt Hamber Touch-Less is the latest eco-friendly pressure-washer, pre-clean, snow foam which can be applied by pump spray or trigger. Applied at typically a 4% PIR (Panel Impact Ratio) the bio-degradable sugar-based product provides exceptional levels of cleaning for all automotive exterior paintwork. Unlike other petrochemical-based cleaners Touch-Less delivers free and easy rinsing, reducing the effort required of subsequent bucket washes and helping post-treatments to bond more effectively. Touch-Less also contains corrosion inhibitors, is pH ~12, and contains no phosphates, solvents, NTA, or caustic soda.
Although similar to Bilt-Hamber Auto-Foam, the performance of these two products does differ depending on the type of traffic film they are applied to. Depending on the type of road film Touch-Less might work more efficiently than the Foam. However, if a vehicle is heavily soiled, in some cases, Auto-Foam may be superior.
Directions
- Touch-Less may be applied with trigger spray, pump spray, pressure washer, or snow foam lance. The minimum recommended dilution rate should be 2% PIR (Panel Impact Ratio) and up to 5% for very dirty vehicles. Where application is through trigger spray or pump spray, the dilution calculation is easy to achieve, however, for application with pressure equipment it is essential to determine the amount of water being delivered to the equipment reservoir.
- Fill the detergent bottle or reservoir (on machine or lance) up to capacity with plain water. Turn detergent feed to full. Take a large bucket or container and discharge the lance into this, watching the detergent bottle until empty. Once empty, stop.
- The following calculations will achieve 4% dilution; Measure the total amount collected and multiply this number by 0.04 (Total can be measured in either volume with a measuring jug or by weight) this is the amount of Touch-Less to use.
- Add the calculated amount from to the pressure-washer reservoir and top up to full with cold water and shake in for a few moments.
- Apply touchless to entire vehicle or panel by panel. Allow to soak for 1-5 minutes (but never allow to dry). Power-wash off.
- It is not necessary to use all diluted touch-less in one wash. One litre of diluted product should last 4-5 washes. Apply to cool panels in shaded conditions. Do not allow this product to dry in use. Keep the bottle neck and lid clean.
-
General Information:
- Orders dispatched same day if placed by 12pm from Monday to Friday.
- Orders over $120 receive free shipping. (excludes bulky and heavy items over 10kg)
- Shipping costs are calculated at checkout and are based on the size and weight of your order and your location.
- Shipping Time: 2-5 Business Days. Longer delivery times may apply to WA, NT and North QLD
- Automated shipping information and tracking will be provided in your confirmation email. You will have up-to-date information on your parcel.
Delivery Options:
- AusPost Standard: 2-7 Business Days
- AusPost Express: 1-4 Business Days
- Courier Service: 2-10 Business Days (No PO Boxes or Parcel Lockers)
Please allow longer delivery times to WA, NT, North QLD, regional and remote areas.
Full shipping policy click here
-
What is your return policy?
Items must be returned within 30 days in like new condition with original packaging.
To return an item, email us at sales@autobuff.com.au to receive a Return Authorisation Number and instructions. Products returned without authorisation will not be accepted.
All orders with free shipping will be charged at the standard shipping rate before a refund is issued.
If the return of a product causes the original order to fall below the free shipping threshold the remaining items and returned items will be billed for the normal shipping charges.
The cost of the returned items, minus shipping charges, will be promptly credited via the payment method used. It may take 5-7 days for your bank to process the credit.
Who pays for return shipping costs?
AutoBuff covers return shipping costs if the return is due to a manufacturing defect or as a result of our error. We will email you with instructions on how to return the product(s) to us in this situation.
Items returned for reasons other than defect or AutoBuff's error will not qualify for free return shipping. These returns include reasons such as changed my mind, did not like the product and ordered the incorrect product.
Can I exchange an item?
Yes. Please email us at sales@autobuff.com.au and let us know that you will be returning an item and what item you would like instead. We will email you a Return Authorisation Number. Upon our receipt of the returned item, we will ship out the new item. You will be credited or charged the price difference, less shipping, via the payment method used.