Maniac Line Wheel & Tyre Cleaner 1L

Maniac Line Wheel & Tyre Cleaner

Maniac Line Wheel & Tyre Cleaner removes brake dust and road dirt from wheels and tyres. It has a specific and balanced acid-free, effective and safe formula. Its high concentrate means it can diluted up to 1:10 effortlessly dissolving winter road dirt and brake dust that settles on the rims. Wheel & Tyre Cleaner is able to remove the tyre dressings previously applied Due to its high detergency capacity it is also suitable for cleaning the suspension section, the tyres and the plastic coverings of the wheel arch compartment.

Spray Wheel & Tyre Cleaner on the surface of the wheel and the tyre, leave it to act for about 2-5 minutes and then rinse. In the presence of more stubborn dirt, repeat the operation with the help of a brush or a wheel brush or mitt. The mechanical action generates a lubricated foam that encapsulates dirt, facilitating its removal during the subsequent rinsing phase.

The product is not touchless, but using the pressure of the pressure washer during rinsing, on not too stubborn dirt, it can also be used WITHOUT MECHANICAL ACTION.

Maniac Line Wheel & Tyre Cleaner Dilution Ratios

• Stubborn dirt: 1:3
• Winter dirt: 1:5
• Summer dirt: 1:10

How To Use Maniac Line Wheel & Tyre Cleaner

Spray Maniac Line Wheel & Tyre Cleaner directly onto the rim and tyre and leave to act for 2-5 minutes without it drying.

Extend the application also to the wheel arch for a complete cleaning of the area.

After letting the product act, you can intervene mechanically to facilitate the removal of the most stubborn dirt.

Then proceed with a thorough rinse.

If the dirt persists, you can repeat the operation using a wheel brush or mitt to reach the most hidden and difficult parts. The combination of the mechanical action and the product formula produces a lubricating foam that encloses dirt, making it easier to eliminate during rinsing. The product can also be dispensed in the form of foam using a device such as pump foamer. Even if the product is not designed to be used without mechanical action, the use of a pressure washer can allow, in cases of not too resistant dirt, to proceed without direct intervention. When finished, your rims will be completely clean and free of tyre dressing residue.

If after using "Wheel and Tyre Cleaner" you still notice deposits, especially in the gaps of the rims, it could be ferrous contamination rather than road dirt. In these cases, the use of a specific decontaminant such as "Iron Remover" is recommended to easily remove such residues.

FAQ

Can I use the product as a foam?

Yes, you can apply the product directly onto the surface to be treated in foam mode also with a hand pump foamer.

Is it safe on wheels and tires?

Yes, it is safe of on all types of wheels, even the most delicate ones such as those that are painted black or coated with wraps or in Plastic Dip. It is safe on all types of tyres, as well as conventional tyres, with white bands and off-road tyres with lettering and decals.

Why should we use a brush?

A brush helps to loosen the most stubborn dirt and reach the most hidden places. If you do not have a high-pressure washer, the brush can help remove the most hidden dirt in the interstices of the wheel easily, especially with narrow spokes.

RECOMMENDATIONS: Use the product only on completely cold surfaces, and make sure that the surface to be treated is completely cooled due to its proximity to the braking system. Never let the product dry.