EXTERIOR
  • INTERIOR
  • PROTECTION
  • EQUIPMENT& ACCESSORIES
  • SHOP BY BRAND
  • Sale

    Labocosmetica ARMORIUS PPF Slip Solution

    10% Off Orders Over $200 only applies to products not already discounted

    Size

    Labocosmetica ARMORIUS PPF Slip Solution - Absolute Control, Perfect Positioning

    Professional Solution for PPF Installation Paint Protection Film & Vinyl Wrap

    Slip Solution represents the technological evolution in the installation of PPF protective films. Unlike DIY solutions or cosmetic products adapted to the task, it has been specifically formulated to meet the needs of automotive professionals who require surgical precision and long-lasting results.

    Ultra-concentrated dosage (1%): 10ml makes 1L of active solution.
    100% compatible: With all PPF and Vinyl Wrap brands.
    ‘Zero Residue’ Action: Prevents yellowing and early lifting.
    ‘Cushion Effect’ slip:  Enables millimetric positioning.
    Controlled adhesion: Activates only under squeegee pressure.

    Slip Solution is specifically formulated for Car Care & Detailing professionals who work on protective film installation. Unlike general-purpose products such as common soaps or gels, it uses a plant-derived non-ionic surfactant system.

    Technical Details

    The surfactants create a stable hydrodynamic cushion between the film and the bodywork, allowing precision positioning during application. Under the mechanical pressure of the squeegee, the formulation collapses instantly, expelling the liquid completely without leaving residues.

    This mechanism, called Lock-on-Demand, eliminates the risk of trapping polymers or oils in the adhesive zone, a common issue with substitute products such as baby shampoo, which can cause hazing or progressive weakening of the adhesive.

    Technical Specifications

    • pH Level: 7-8 (balanced, compatible with acrylic adhesives)
    • Density: 1,017 g/mL
    • Surfactants: Plant-derived non-ionic
    • Dilution ratio: 1:100 (10 ml per 1 L of water)
    • Yield: 1L = ~100L of ready-to-use solution
    Scientific Comparative Analysis

    Slip Solution vs. Common Alternatives

    The fundamental differences between Slip Solution and the empirical methods commonly used.

    Parameter Slip Solution Soapy Water Baby Shampoo
    pH 7-8 (balanced) 9-11 (variable) 6-7
    Residues Zero Possible Oils/Lanolin
    Dosage control Precise (1%) By eye By eye
    PPF compatibility 100% Risky Poor
    Silvering risk None Medium-High High
    Cost per litre Low Negligible Very low
    Result meets expectations Yes No No

     

    As the data shows, Slip Solution is the only solution specifically designed for PPF installation, with chemical and physical parameters optimised to deliver superior performance and long-term durability.

    Ideal Use Cases

    PPF installation on complex hoods and bumpers
    Vinyl Wrap and graphics application
    Window Tint film installation
    Curved surfaces where repositioning is critical

    Application Guide

    • Standard Dilution: Mix 8–12 ml of Slip Solution in 1L of distilled water (ratio ~1:100). The use of tap water is not recommended due to the presence of limescale and minerals.
    • Shaking: Gently shake the spray bottle to homogenise the solution without creating excessive foam.
    • Surface Preparation: Clean and decontaminate the car’s surface thoroughly before application.
    • Spraying: Generously spray Slip Solution on both the bodywork and the adhesive side of the film (after removing the liner).
    • Positioning: Position the film. The solution allows it to slide freely for perfect placement.
    • Setting: Once in position, use a PPF-specific squeegee, working from the centre outward to push out the liquid and lock the adhesive.

    Pro Tip: On very hot days you can slightly increase the dose (up to 15 ml/L) to slow drying and gain more positioning time.