Gtechniq Halo v2 Flexible Film Coating for PPF & Vinyl Wraps 30ml/50ml

FLEXIBLE FILM COATING FOR PPF AND VINYL WRAPS

Gtechniq HALO v2 enhances the performance of Paint Protection Film (PPF) and vinyl wraps. It’s a chemically bonding, ultra-dense flexible film that becomes the permanent surface of the film, protecting it from the elements a car faces daily.

A key component of the HALOv2 is that it now only requires one layer of product to be applied, rather than the previous version which required two layers, saving time, effort and making maintenance a breeze.

The density of the coating improves dirt and water repellency of PPF or vinyl. It also helps to prevent staining from dirt, as well as reducing yellowing caused by UV.

Rigorous real-world and laboratory testing has proven HALO to be compatible with all types of gloss, matte, and satin vinyl and PPF.

Contents

• 1x Halo 30ml or 50ml
• 1x Pair of Nitrile Gloves
• 1x AP2 Ultra Soft Foam Filled Applicator
• 1x Master Instruction Leaflet
• 1x WS1 Gtechniq Window Sticker

Directions

• Shake bottle well and wear gloves
• To apply HALO, your vehicle must be indoors and remain indoors, for at least 12 hours after the coating has been applied. For best results, good lighting is essential
• If applying to previously installed film, wash and decontaminate the vehicle with Gtechniq W5 Citrus All Purpose Cleaner and W6 Iron and General Fallout Remover
• Spray a 30% dilution of isopropyl alcohol (IPA) on to a Gtechniq MF1 ZeroR Microfibre Buff Cloth
• With your surface fully cooled, buff to remove any fingerprints or other surface contaminants. This process ensures you get the maximum number of chemical bonds between HALO and the film or vinyl
• Apply HALO evenly on the application pad and set the bottle aside
• Apply with applicator provided in overlapping strokes to an area roughly 2’x2’, or work to the bodylines of the vehicle
• After coating a panel remove residue with an MF1 cloth. Always remove from further than you have applied, working from the outside in
• Once applied carry out a final check with an MF1 cloth and a bright but diffused light source – this will ensure no residue remains on the surface. Allow the coating to cure for at least one hour and repeat the application process so that all film and vinyl is coated with two layers of HALO
• Unopened, HALO has a 12 month shelf life from the time of purchase
• Store in a cool, dry place
• Use product within 3 months of opening